JAM Party Instruction Manual download pdf (Page 4)

Listening to a non-Bluetooth

audio device

1. Plug a 3.5mm audio cable (not included), into the AUX audio line input located on

the back of the unit.

2. Plug the other end of the audio cable into the line out or headphone jack of your

audio device.

3. Press the POWER button located on top of the JAM Party.

4. Press play on the connected device.

NOTE: You may need to adjust the volume on your audio device to achieve proper volume.

NOTE: Track forward/reverse and play/pause controls on JAM Party will not work when

using line-in audio jack.

Listening to your device wirelessly over Bluetooth

To listen to your music over Bluetooth

wireless connection, you need to pair your device

with Jam Party:

1. Make sure your device has Bluetooth

capability, and it is enabled.

2. Press the power button; and the blue indicator will begin to ﬂash.

3. The Unit will be listed as “Jam Party” on your Device.

4. Follow the pairing instructions of your device to pair with the Jam Party.

5. Press play on your device and use controls on the device and Jam Party to adjust

desired volume.

NOTE:

• A pairing code is not required.

• Once you have successfully paired your device, you may not need to repeat the

above steps.

• When pairing a device, please ensure the AUX cable is unplugged and your device

has been Bluetooth

enabled.

• When pairing with a computer, please consult your computer manufacturer for

Bluetooth

pairing instructions and/or the latest Bluetooth

Drivers.

• When turning the Jam Party “on” for the 1st time you will hear a loud tone at startup.

After the 1st time you turn the Speaker on, the speaker will turn back on at the

previously set volume.

To eject and retract the

handle press on both sides of

the handle as shown.

To release the Kickstand

press on the dots on

bottom of unit.

1 2 3 4 5

No comments

JAM Party Instruction Manual Page 4